Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel

Pandurangan Saravanan; Vngaranahalli Srinivasan Raja

doi:doi:10.11648/j.css.20170201.14

| Peer-Reviewed

Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel

Pandurangan Saravanan, Vngaranahalli Srinivasan Raja

Published in Colloid and Surface Science (Volume 2, Issue 1)

Received: 29 November 2016 Accepted: 3 January 2017 Published: 31 January 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Plasma immersion ion implantation (PIII) of nitrogen has been performed on three austenitic stainless steels namely, Type 304L SS, MnSS-1 (16%Cr-6%Mn-4Ni) and MnSS-2 (16%Cr-9%Mn) with at three different temperatures namely, 250, 380 and 500°C for 3 h. The GXRD studies shows that mixed iron nitride phases were formed along with expanded austenitic, when sample implanted at 250°C and 380°C. These nitrides are with different stoichiometry along the thickness and their formation is less favorable in nickel free Mn alloy at lower implantation temperature and timing (250°C for 3 h). On higher implantation condition (500°C, 6 h), Ni promotes the ′ formation and Mn suppress the ′ formation. Microhardness measurements revealed a significant increase in hardness after PIII treatment for all the alloys under investigation, but it is more effective in Ni free Mn containing SS.

Published in	Colloid and Surface Science (Volume 2, Issue 1)
DOI	10.11648/j.css.20170201.14
Page(s)	26-36
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Plasma Immersion Ion Implantation, XRD, GXRD, Hardness

References

[1]	W. Ensinger, Surface & Coating Technolology, 100-110 (1998) 341-352.
[2]	Linda Gil, Sonia Brühl, Lorena Jiménez, Ovídio Leon, Rafael Guevara, Mariana and H. Staia, Surf. Coat. Technol. 201 (2006) 4424–4429.
[3]	Xiubo Tian and Paul K. Chu, Scripta mater. 43 (2000) 417-422.
[4]	P. Saravanan, V.S. Raja and S. Mukherjee, Surf. Coat. Technol.201 (1998) 8131-8135.
[5]	Lei M. K. and Zhu X. M., Biomaterials,22 (2001) 641-647.
[6]	J.R. Conrad, R.A. Dodd, F.J. Worzala, and X. Qiu, Surface & Coating Technolology, 36, (1988) 927-937.
[7]	S. Mandl, D. Manova, H. Neumann, M.T. Pham, E. Richter, and B. Rauschenbach, Surf. Coat. Technol. 200 (2005) 104-108.
[8]	L. Escalada, J. Lutz, S. Mändl, D. Manova, H. Neumann, and S. Simison, Surf. Coat. Technol.211 (2012) 76-79.
[9]	Yanhui Zhao, Baohai Yu, Limin Dong, Hao Du, and Jinquan Xiao, Surf. Coat. Technol.210 (2012) 90-96.
[10]	A. Fossati, F. Borgioli, E. Galvanetto, and T. Bacci, Corros. Sci.48 (2006) 1513–1527.
[11]	K.S. Wang, H.L. Che, M.K. Lei, Surf. Coat. Technol.288 (2016) 30-35.
[12]	M. CASTRO-COLIN, W. DURRER, J. A. LÓPEZ, E. RAMIREZ-HOMS, Journal of Iron and Steel Research, International, 23, 4, (2016), 380-384.
[13]	Y. Li, Z. Wang, L. Wang, Applied Surface Science, 298, (2014), 243-250.
[14]	D. Manova, S. Mändl, H. Neumann, B. Rauschenbach, Surf. Coat. Technol.256, (2014), 64-72.
[15]	K. Ram Mohan Rao, S. Mukherjee, P.M. Raole, and I. Manna, Surf. Coat. Technol.200 (2005) 2049-2057.
[16]	P. R. Levey, and A. Van Bennekom, Corrosion, 51 (1995) 911-921.
[17]	R.D. Pehlke, and J.F. Elliatt, Transactions of Metallurgical Society of AIME, (1960) 218, 1088-1101.
[18]	H. Pelletier, D. Muller, P. Mille, A. Cornet, and J.J. Grob Surf. Coat. Technol. 151 - 152 (2002) 377-382.
[19]	Y. Li, L. Wang, J. Xu, and D. Zhang, Surf. Coat. Technol.206 (2012) 2430-2437.
[20]	G.A. Collins, R. Hutchings, K.T. Short, J. Tendys, X. Li, and M. Samandi, Surf. Coat. Technol. 74-75 (1995) 417-424.
[21]	J. Wang, J. Xiong, Q. Peng, H. Fan, Y. Wang, G. Li, and B. Shen, Mater. Charact. 60 (2009) 97-203.
[22]	Y. Li, L. Wang, J. Xu, and D. Zhang, Surf. Coat. Technol.206 (2012) 2430-2437.
[23]	M. Samandi, B. A Shedden, D. J. Smith, G. A.Collins, R. Hutchings and J. Tendys, Surface & Coatings Technology,59 (1993) 261-266.
[24]	S. Mukherjee, J. Chakraborty, S. Gupta, P. M. Raole, P. I. John, K. R. M. Rao and I. Manna, Surface & Coating Technology, 156 (2002) 103-109.
[25]	P.A. Dearnley, A. Namver, G. G. A. Hibberd and T. Bell, in: E. Broszeit, W.D. Munz, H. Oechsner, K.-T. Rie, G.K. Wolf (Eds.), Plasma Surface Engineering, vol. 1, DGM Informationsgesellschaft, Oberursel, “Proceedings of the 1st International Conference on Plasma Surface Engineering, Garmisch – Partenkirchen”, 1989, p. 219. Vol 1 (1989) 219-226.
[26]	K. Ichii, K. Fujimura and T. Takase, E. Broszeit, W.D. Munz, H. Oechsner, K.-T. Rie, G.K. Wolf(Eds.), Plasma Surface Engineering, vol. 1, DGM Informationsgesellschaft, Oberursel, “Proceedings of the 1st International Conference on Plasma Surface Engineering, Garmisch –Partenkirchen”, (1989) 1187-1192.
[27]	E. Menthe and K. T. Rie, Surface & Coatings Technology, 116-119 (1999) 199-204.
[28]	D. J. Haen., C. Quaeyhaegens, G. Knuyt, L. De Schepper, L.M. Stals, and Van M. Stappen, Surface and Coating Technology, 60 (1993)468-473.
[29]	F. Borgioli, A. Fossati, G. Matassini, E. Galvanetto, and T. Bacci, Surf. Coat. Technol. 204 (2010) 3410-3417.
[30]	J. Talonen, and H. Hänninen, Acta Mater. 55, 18, (2007) 6108-18.
[31]	N. Suutala, Metallurgical Transaction A, (1982) 13A, 2121-2130.
[32]	C. Qiu, Metallurgical Transaction A, (1993) 24A, 629-645.

Cite This Article

Plain Text BibTeX RIS

APA Style

Pandurangan Saravanan, Vngaranahalli Srinivasan Raja. (2017). Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel. Colloid and Surface Science, 2(1), 26-36. https://doi.org/10.11648/j.css.20170201.14

Copy | Download

ACS Style

Pandurangan Saravanan; Vngaranahalli Srinivasan Raja. Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel. Colloid Surf. Sci. 2017, 2(1), 26-36. doi: 10.11648/j.css.20170201.14

Copy | Download

AMA Style

Pandurangan Saravanan, Vngaranahalli Srinivasan Raja. Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel. Colloid Surf Sci. 2017;2(1):26-36. doi: 10.11648/j.css.20170201.14

Copy | Download

@article{10.11648/j.css.20170201.14,
  author = {Pandurangan Saravanan and Vngaranahalli Srinivasan Raja},
  title = {Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel},
  journal = {Colloid and Surface Science},
  volume = {2},
  number = {1},
  pages = {26-36},
  doi = {10.11648/j.css.20170201.14},
  url = {https://doi.org/10.11648/j.css.20170201.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.css.20170201.14},
  abstract = {Plasma immersion ion implantation (PIII) of nitrogen has been performed on three austenitic stainless steels namely, Type 304L SS, MnSS-1 (16%Cr-6%Mn-4Ni) and MnSS-2 (16%Cr-9%Mn) with at three different temperatures namely, 250, 380 and 500°C for 3 h. The GXRD studies shows that mixed iron nitride phases were formed along with expanded austenitic, when sample implanted at 250°C and 380°C. These nitrides are with different stoichiometry along the thickness and their formation is less favorable in nickel free Mn alloy at lower implantation temperature and timing (250°C for 3 h). On higher implantation condition (500°C, 6 h), Ni promotes the ′ formation and Mn suppress the ′ formation. Microhardness measurements revealed a significant increase in hardness after PIII treatment for all the alloys under investigation, but it is more effective in Ni free Mn containing SS.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel
AU  - Pandurangan Saravanan
AU  - Vngaranahalli Srinivasan Raja
Y1  - 2017/01/31
PY  - 2017
N1  - https://doi.org/10.11648/j.css.20170201.14
DO  - 10.11648/j.css.20170201.14
T2  - Colloid and Surface Science
JF  - Colloid and Surface Science
JO  - Colloid and Surface Science
SP  - 26
EP  - 36
PB  - Science Publishing Group
SN  - 2578-9236
UR  - https://doi.org/10.11648/j.css.20170201.14
AB  - Plasma immersion ion implantation (PIII) of nitrogen has been performed on three austenitic stainless steels namely, Type 304L SS, MnSS-1 (16%Cr-6%Mn-4Ni) and MnSS-2 (16%Cr-9%Mn) with at three different temperatures namely, 250, 380 and 500°C for 3 h. The GXRD studies shows that mixed iron nitride phases were formed along with expanded austenitic, when sample implanted at 250°C and 380°C. These nitrides are with different stoichiometry along the thickness and their formation is less favorable in nickel free Mn alloy at lower implantation temperature and timing (250°C for 3 h). On higher implantation condition (500°C, 6 h), Ni promotes the ′ formation and Mn suppress the ′ formation. Microhardness measurements revealed a significant increase in hardness after PIII treatment for all the alloys under investigation, but it is more effective in Ni free Mn containing SS.
VL  - 2
IS  - 1
ER  -

Copy | Download

Author Information

Pandurangan Saravanan

R&D Center for Iron and Steel, Steel Authority of India Limited, Ranchi, India
Vngaranahalli Srinivasan Raja

Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology Bombay, Mumbai, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Pandurangan Saravanan, Vngaranahalli Srinivasan Raja. (2017). Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel. Colloid and Surface Science, 2(1), 26-36. https://doi.org/10.11648/j.css.20170201.14

Copy | Download

ACS Style

Pandurangan Saravanan; Vngaranahalli Srinivasan Raja. Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel. Colloid Surf. Sci. 2017, 2(1), 26-36. doi: 10.11648/j.css.20170201.14

Copy | Download

AMA Style

Pandurangan Saravanan, Vngaranahalli Srinivasan Raja. Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel. Colloid Surf Sci. 2017;2(1):26-36. doi: 10.11648/j.css.20170201.14

Copy | Download

@article{10.11648/j.css.20170201.14,
  author = {Pandurangan Saravanan and Vngaranahalli Srinivasan Raja},
  title = {Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel},
  journal = {Colloid and Surface Science},
  volume = {2},
  number = {1},
  pages = {26-36},
  doi = {10.11648/j.css.20170201.14},
  url = {https://doi.org/10.11648/j.css.20170201.14},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.css.20170201.14},
  abstract = {Plasma immersion ion implantation (PIII) of nitrogen has been performed on three austenitic stainless steels namely, Type 304L SS, MnSS-1 (16%Cr-6%Mn-4Ni) and MnSS-2 (16%Cr-9%Mn) with at three different temperatures namely, 250, 380 and 500°C for 3 h. The GXRD studies shows that mixed iron nitride phases were formed along with expanded austenitic, when sample implanted at 250°C and 380°C. These nitrides are with different stoichiometry along the thickness and their formation is less favorable in nickel free Mn alloy at lower implantation temperature and timing (250°C for 3 h). On higher implantation condition (500°C, 6 h), Ni promotes the ′ formation and Mn suppress the ′ formation. Microhardness measurements revealed a significant increase in hardness after PIII treatment for all the alloys under investigation, but it is more effective in Ni free Mn containing SS.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - Surface Characterization of Plasma Immersion Nitrogen Ion Implanted Austenitic Stainless Steel
AU  - Pandurangan Saravanan
AU  - Vngaranahalli Srinivasan Raja
Y1  - 2017/01/31
PY  - 2017
N1  - https://doi.org/10.11648/j.css.20170201.14
DO  - 10.11648/j.css.20170201.14
T2  - Colloid and Surface Science
JF  - Colloid and Surface Science
JO  - Colloid and Surface Science
SP  - 26
EP  - 36
PB  - Science Publishing Group
SN  - 2578-9236
UR  - https://doi.org/10.11648/j.css.20170201.14
AB  - Plasma immersion ion implantation (PIII) of nitrogen has been performed on three austenitic stainless steels namely, Type 304L SS, MnSS-1 (16%Cr-6%Mn-4Ni) and MnSS-2 (16%Cr-9%Mn) with at three different temperatures namely, 250, 380 and 500°C for 3 h. The GXRD studies shows that mixed iron nitride phases were formed along with expanded austenitic, when sample implanted at 250°C and 380°C. These nitrides are with different stoichiometry along the thickness and their formation is less favorable in nickel free Mn alloy at lower implantation temperature and timing (250°C for 3 h). On higher implantation condition (500°C, 6 h), Ni promotes the ′ formation and Mn suppress the ′ formation. Microhardness measurements revealed a significant increase in hardness after PIII treatment for all the alloys under investigation, but it is more effective in Ni free Mn containing SS.
VL  - 2
IS  - 1
ER  -

Copy | Download